SENSOR COMPATIBILITY "Key" (Numbers appear below the cable/sensor):
1.) For use with ProComp / BioGraph
2.) For use with ProComp / CardioPro
3.) For use with FlexComp
4.) For use with ProComp+ / ProComp2
5.) For use with ProComp5 / BioGraph
A.)This is also a replacement sensor for the T4000P and T9500-02
B.)To be used only on Channels A&B in ProComp mode w/BioGraph Software for raw EMG



T9401M-60
MyoScan-Pro 60 Hz
EMG Sensor $395.00
1, 4, 5
T9503M
MyoScan EMG Sensor
$295.00
1,3,5,B
T9503Z
MyoScan-Z
EMG Sensor
$395.00
1,3,5, A
(Requires BioGraph Ver. 5.0 or later)



SA9308M
HR/BVP Sensor
$295.00
1,2,3,4,5
SA9309M
Skin Conductance Sensor
$295.00
1,2,3,4,5
SA9310M
Temperature Sensor
$210.00
1,2,3,4,5
SA9311M
Respiration Sensor
$295.00
1,2,3,4,5
T9305M
EEG Sensor V2
$295.00
1,3,4,5
T9305Z
EEG-Z Impedence
Testing Sensor
$395.00
1,3,4,5



T9306M
EKG Sensor
$295.00
1,2,3,4,5
T9307M
EKG Sensor w/wrist strap
$325.00
1,3,4,5
(Requires BioGraph Ver 5.0 or later)
SA9330
EKG Sensor/PolarTM Receiver
$250.00
1,3,4,5
(Requires PolarTM Transmitter
Belt - sold separately)
Technical Descriptions
for the above sensors
appear at the bottom
of this page.
If you have any questions,
please call 800-322-4461

EKG Wrist Strap Kit
Item No. SA9325
Price: $65.00
(Requires Biograph
Ver 5.0 or later)
![gel1[1] gel1[1]](https://www.currenttechnologyinc.com/wp-content/uploads/2020/08/gel11-1.jpg)
NuPrep Skin Prep Gel
Item No. 10-30 (set of 3 ea. 4 oz tubes)
Price: $37.00
TEN20 Conductive Paste
Item No. 10-20-4T (set of 3 ea. 4 oz tubes)
Price:$37.00
![teleinfcf[1] teleinfcf[1]](https://www.currenttechnologyinc.com/wp-content/uploads/2020/08/teleinfcf1.gif)
TeleInfiniti Compact Flash
Item No. T9600
The unit disappears into the
Compact Flash slot, leaving only
the antenna visible to transmit data up to 300 feet
Price: $995.00
(If purchased w/system:
Price is $595.00) (Requires BioGraph 4.0 or later)
Systems: 1,3,5
![telemetry[1] telemetry[1]](https://www.currenttechnologyinc.com/wp-content/uploads/2020/08/telemetry1.jpeg)
TeleInfiniti
Item No. T9595
Tele-Infiniti is a Bluetooth Class II telemetry unit that attaches to our encoders and transmits
data to 30 ft.
Price: $895.00
System: 4

Push Button Switch
Item No. SA7660
Push button allows you to remotely
set a time mark, move a script to the
next step or respond to a stimulus.
Price: $130.00
System: 1,3,5
![foots[1] foots[1]](https://www.currenttechnologyinc.com/wp-content/uploads/2020/08/foots1-1.jpg)
Foot Switch
Item No. SA7551
Foot Pedal connects to all encoders and
allows you to remotely set a time mark,
move a script to the next step or
respond to a stimulus.
Price: $130.00
System:1,3,5

TTL EEG Monopolar Biopolar Kit
w/DIN cable.
Includes: Two gold cup cables & two gold ear clip cables, as well
as the DIN extender cable.
Item No. T8750
Price:
$125.00

TTL EEG Monopolar Biopolar Kit
w/DIN cable.
Includes: Two gold cup cables &
two gold ear clip cables, without the
DIN extender cable.
Item No. T8751
Price:
$100.00

TTL EEG Linked Ears Kit
(requires one T8750)
Includes: Necessary cables to add
a linked ear reference to the
monopolar/bipolar kit.
Item No. T8755
Price:
$50.00

TTL EEG 2 Channel Connectivity Kit
(requires two T8750)
Includes: Necessary cables to
measure two channels with common reference & ground.
Item No.
T8760
Price:
$55.00

TTL EEG 4 Channel Connectivity Kit
(requires four T8750)
Includes: Necessary cables to
measure four channels with
common reference & ground.
Item No.
T8761
Price:
$75.00

TTL EEG DIN Extender Cable
Connects to client via replaceable
electrodes. Enabling monopolar or
bipolar connections, it is the most
versatile options. Electrodes sold
separately.
Item No.
T8740
Price:
$55.00
Description of Sensors:
MyoScan-ProTM A pre-amplified surface electromyography sensor used with the ProComp Infiniti channels C – H for RMS sEMG. Features a range switch in the sensor head to change filter settings between 0 – 400 μV Narrow filter, 0 – 400 μV Wide filter, 0 – 1600 μV Wide filter. Compatible with Triode electrodes or extender cables for wider placement of electrodes. MyoScanTM A pre-amplified surface electromyography sensor used with the ProComp Infiniti channels A – B for RAW sEMG. Compatible with Triode electrodes or extender cables for wider placement of electrodes. Range of 0 – 2000 μV. MyoScan-ZTM EEG-ZTM A pre-amplified electroencephalograph sensor with built in impedance sensing. Get the ultimate hook up every time with this sensor as it monitors both the reactive and resistive elements of the client, sensor connection. Signal Input Range 0 -200 μV, Bandwidth 2 Hz – 1 KHz. EEG V2TM A pre-amplified electroencephalograph sensor, without the built in impedance sensing of the EEG-Z. EKGTM A pre-amplified electrocardiograph sensor, for directly measuring heart electrical activity. Connects via extender cables for a single channel hook up. Bandwidth of 0.05 Hz – 1 KHz. EKGTMwith Wrist Strap A pre-amplified electrocardiograph sensor, for directly measuring heart electrical activity. Connects via extender cables for a single channel hook up. Bandwidth of 0.05 Hz – 1 KHz. EKGTM Receiver A pre-amplified electrocardiograph sensor, for directly measuring heart electrical activity via the PolarTM Transmitter Belt (purchased separately). Bandwidth of 0.05 Hz – 1 KHz. Temperature Sensor A skin temperature sensor, measuring between 10°C – 45°C ( 50°F - 115°F ). Blood Volume Pulse (BVP) A pulse detection sensor housed in a small finger worn package, to measure pulse rate of client. Respiration An easy fitting high durability latex rubber band fixed with velcro respiration belt for monitoring respiration rate from a client. Can be worn either thoracically or abdominally, over clothing. Skin Conductance A sensor to measure the conductance across the skin, normally connected to the fingers or toes. Supplied with two finger bands. Extender Cables Extend the placement possibilities of the MyoScan and MyoScan Pro (T8720), sensors with the shielded, low noise extender cables. Also used with the U-Control, (T8820) and available in a number of lengths and configurations. Vaginal & Rectal Sensors For single patient multiple use monitoring of the pelvic floor muscles. These precision sensors feature a vertical electrode configuration to ensure measurement along the direction of the muscle group. The T-bar ensures repeatability of measurement with respect to orientation and depth placement between uses. The small overall size and bulb configuration enable comfortable and secure seating of the sensor in a number of client positions including walking, standing or prone. |
SENSOR COMPATIBILITY:
1.) For use with ProComp / BioGraph
2.) For use with ProComp / CardioPro
3.) For use with FlexComp
4.) For use with ProComp+ / ProComp2
5.) For use with ProComp5 / BioGraph
A.)This is also a replacement sensor for the T4000P and T9500-02
B.)To be used only on Channels A&B in ProComp mode w/BioGraph Software for raw EMG